APC -UPS Pro 1500VA | BR1500G-IN Power-Saving Back


APC Back-UPS Pro 1500VA – BR1500G-IN

Brand APC
Model & Series BR1500G-IN
Type Desktop UPS, Portable UPS
Rating in VA | Watts 1500 VA | 865 Watts
Battery Module In-Built Battery Module
No’s of Battery Required
DC Voltage
Warranty UPS-24 Months, Battery-24 Months
Dimensions (H*W*D) in cm 30.1*11.2*38.2 in cm
Weight in Kgs (approx.) 12 Kgs

Note: 1. In-Built Battery is included in this purchase APC ups with inbuilt battery



APC ups with inbuilt battery

  • Adjustable voltage sensitivity – Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points – Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Audible alarms – Provides notification of changing utility power and UPS power conditions
  • Automatic self-test – Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification – Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Battery replacement without tools – Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  • Battery-protected and surge-only outlets – Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR) – Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Building Wiring Fault Indicator – This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Cold-start capable – Provides temporary battery power when the utility power is out.
  • Disconnected battery notification – Warns when a battery is not available to provide backup power.
  • Green mode – Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Hot-swappable batteries – Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management – Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • LCD graphics display – Text and mimic diagrams that display modes of operation, system parameters, and alarms.
  •  APC ups with inbuilt battery – Automatically cut power to idle equipment to conserve electricity.
  • Resettable circuit breaker – Easy recovery from overloads; no need to replace a fuse.
  • Serial connectivity – Use any Home Automation network to monitor and control the S20 through its RS-232 serial port.
  • USB connectivity – Provides management of the UPS via a USB port (not available on all models).
  • User-replaceable batteries – Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) apc ups with inbuilt battery
Topology Line Interactive
Input voltage range 160 – 280V
Max Configurable Power 865Watts / 1.5kVA
Battery VAH Capacity 216 VAH
Control panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
Height X Width X Depth 301MM, 30.1CM X 114MM, 11.4CM X 382MM, 38.2CM
Net Weight 11.76 KG
Operating Temperature 0 – 40 °C APC ups with inbuilt battery
Standard warranty 2 years repair or replace


There are no reviews yet.

Be the first to review “APC -UPS Pro 1500VA | BR1500G-IN Power-Saving Back”

Your email address will not be published. Required fields are marked *